G201A 1-3 Sharp Point Tester To determine whether accessible sharp points on toys are likely to cause injury.

If the accessible sharp point penetrates a specified depth into the small rectangular opening of the tester, the LED is illuminated to indicate that the point is unacceptably sharp. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.

ORDERING INFORMATION
G201A1 ASTM SHARP POINT TESTER WITH WEIGHT
G201A2 EN SHARP POINT TESTER WITH WEIGHT
G201A3 HOKLAS CALIBRATION CERTIFICATE, SHARP POINT



G201A 4-6 Sharp Edge Tester
To determine whether accessible edges on toys are likely to cause injury.
A self-adhesive PTFE tape is attached to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by children under 8 years old are subject to this requirement before or after use & abuse testing.
ORDERING INFORMATION
G201A4 SHARP EDGE TESTER
G201A5 SPARE TEFLON TAPE - SHARP EDGE TESTER
G201A6 HOKLAS CALIBRATION CERTIFICATE, SHARP EDGE



G201A 7-8 Accessibility Probes
To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups:
Probe A for 0-36 months
Probe B for 37-96 months
ORDERING INFORMATION
G201A7 ACCESSIBILITY PROBE A (0-36 MONTHS)
G201A8 ACCESSIBILITY PROBE B (37-96 MONTHS)



G201A 9-10 Small Parts Cylinder
To determine whether toys & other articles intended for use by children under 3 years old present choking, aspiration, or ingestion hazards because of small parts. If any objects can fit completely into the cylinder without compressing & in any orientation, it is defined as a "Small Part". Its internal dimensions simulate the fully expanded throat of a child under 3 years old.
ORDERING INFORMATION
G201A9 SMALL PARTS CYLINDER (METAL)
G201A10 HOKLAS CALIBRATION CERTIFICATE, SMALL PART



G201A 11-16 Torque Test Kit
To determine whether components of toys can be removed by a certain torque force. A torque-measuring device is used in conjunction with a torque clamp to record the applied force. Any projection, part or assembly of a toy that a child can grasp with at least the thumb & forefinger or the teeth shall be subject to the torque test.
ORDERING INFORMATION
G201A11 TORQUE GAUGE 9BTG
G201A12 TORQUE CLAMP (CENTRAL SCREW TYPE)
G201A13 TORQUE TEST CLAMP (STANDARD)
G201A14 FLAT VISE CLAMP
G201A15 TABLE VISE
G201A16 HOKLAS CALIBRATION CERTIFICATE, TORQUE GAUGE


G201A 17-26 Tension Test Kit
To determine whether the components of toys can be removed by tensile force. A Force gauge is used in conjunction with a clamp to record the force applied. Any projection, part or assembly of a toy that a child can grasp with at least the thumb & forefinger or the teeth shall be subject to the tension test.
ORDERING INFORMATION
G201A17 PUSH/PULL GAUGE FB-20K
G201A18 PUSH/PULL GAUGE FB-50LB
G201A19 PUSH/PULL GAUGE FB-200N
G201A20 THREE PRONGED CLAMP
G201A21 TWO PRONGED CLAMP WITH SCREW
G201A22 SEAM TEST CLAMP
G201A23 LONG NOSE VISE GRIP
G201A24 GENERAL VISE GRIP
G201A25 TABLE VISE
G201A26 HOKLAS CALIBRATION CERTIFICATE, PUSH/PULL GAUGE


G201A 27-28 Impact Flooring Medium
A standardised surface onto which a toy can be dropped from a certain height to simulate possible damage which may occur by falling from a crib, table or counter top or other impact situations. After testing, the toy is examined for possible hazards such as sharp edges, sharp points and small parts.
ORDERING INFORMATION
G201A27 US IMPACT MEDIUM (SET OF 9)
G201A28 EN IMPACT MEDIUM


G201A 29-30 Bite Test Clamp
Simulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test such as sharp points/ sharp edges / small parts.
ORDERING INFORMATION
G201A29 BITE TEST CLAMP
G201A30 HOKLAS CALIBRATION CERTIFICATE, BITE TEST


G201A 31 Compression Head
To simulate the subjecting of a toy to mechanical damage through compressing or other action likely to be performed by a child. After testing, the toy may be tested for sharp edges, sharp points & small parts.
ORDERING INFORMATION
G201A31 COMPRESSION HEAD FOR FORCE GAUGE


G201A 32-33 Flexure Tester
To determine whether metallic wires or materials used for stiffening or retention of form in toys can be easily bent or broken. Potential hazards of sharp points & sharp edges.
ORDERING INFORMATION
G201A32 US FLEXURE TESTER (SET OF 2)
G201A33 EN FLEXURE TESTER (SET OF 2)


G201A 34 Test Fixture for Small Balls
To determine whether loose balls in toys intended for children under 36 months will pass entirely through the test fixture under the influence of their own weight and without compression. A ball which can pass through the test fixture is determined to be a "Small Ball".
ORDERING INFORMATION
G201A34 TEST FIXTURE FOR SMALL BALLS


G201A 35-37 Rattle Test Fixtures
To determine whether rattles for infants of up to 18 months old present choking or suffocating hazards. The rattle is placed in the opening of test fixture. If any part of the rattle can pass through the opening without being pushed or pulled, the rattle has failed. For other rattles incorporating nearly spherical, hemispherical or circular flared ends, a Supplemental Rattle Test Fixture is available.
ORDERING INFORMATION
G201A35 RATTLE TEST FIXTURE (OVAL)
G201A36 SUPPLEMENTAL RATTLE TEST FIXTURE
G201A37 HOKLAS CALIBRATION CERTIFICATE, RATTLE TEST


G201A 38 Pacifier Test Fixture
To determine whether the pacifiers for infants present choking or suffocating hazards. A pacifier is placed centrally in the opening of test fixture. The nipple is subjected to a tensile force of 2 lbs and held for 10 seconds. If the shield is pulled through the fixture, the pacifier has failed.
ORDERING INFORMATION
G201A38 PACIFIER TEST FIXTURE


G201A 39 1 Kg Impact Tester
To simulate the mechanical damage through an impact action likely to be performed by a child. Assessment of sharp edges, sharp points and small parts may be carried out after impact.
ORDERING INFORMATION
G201A39 1 KG IMPACT TESTER

More Information