The Hydrostatic Head Tester M018 accurately and swiftly determines the resistance of fabrics (coated, uncoated, and non-wovens) to water penetration under pressure while firmly clamped in the test rig of 100 cm2 area, by means of dynamic test method and static test method.
Laboratory standard compressed air supply is required to produce the pressure from 0-3 bar inside a built-in water tank filled with distilled water. The tank is linked to a test head to which the specimen is clamped quickly and easily by means of a hand wheel.
After the test has been started, the test pressure is automatically controlled. The test specimen is observed visually for evidence of penetration by water. The test area is well illuminated and an unobstructed observation of the sample is from all sides greatly facilitates the visual drop detection.
WEIGHT
70.0 kg
154 lb
DIMENSIONS
Width
Depth
Height
480.0 mm
540.0 mm
600.0 mm
19.0 inch
22.0 inch
24.0 inch
STANDARDS
NF G07-057
BS EN 20811
AATCC 127
ERT 120-1 160-0
INDA 1ST 80.4
BS 2823/3424-26/29A/29C
EDANA 120.1-80
ISO 420A/811
DIN53886
JIS L1092A/B-b
GB/T 4744
ORDERING INFORMATION
M018 Hydrostatic Head Tester
G265 Silent Laboratory Compressor (Optional)
Larger capacities available on request
