H10-50KT


	H10 - 50KT/S

UNIVERSAL TESTING MACHINES - DUAL COLUMN




	Dual Column Models The dual column materials testing machines have frame capacities of 10kN, 25kN and 50kN (2000 lbf, 5,000 lbf and 10,000lbf) and include two model types, the S series and the T series. These machines are designed to test a wide range of materials in tension, compression, flexure, shear and peel.
		S Series Using a combination of quality engineering and advanced technology, Tinius Olsen offers a series of machines that are accurate and simple to use. All S series machines feature an easy-to-read backlit liquid crystal display which can be switched between a numerical and graphical display. All data shown on this display is obtained in real time, with the autoranging graphical display showing the test curve of the specimen under test. The control unit features dedicated keys for moving the crosshead up, down, stop, performing the test as well as keys for load and extension tare and crosshead return. The control panel also features an alpha-numeric keypad to allow the input of test conditions, test data and the formatting of the test report. The control unit can retain up to five separate test routines for easy and rapid recall.



		Model H10KS (Figure 33)


	Link here to the Testing Textiles web site - articles about testing methods and techniques

Powerful as stand-alone units, the machine capability is enhanced by direct connection of a printer through which comprehensive test reports and high resolution graphs can be quickly obtained. The S series of testers are also designed for users all over the world...an optional language module can be plugged into the control panel and all data on the backlit LCD display will be shown in the selected language. Language options include: English, French, Portuguese, German, Italian, Spanish and Polish.


	T Series Building on the quality and technology that is built into the S series, Tinius Olsen offers the T series of machines to complement the popular and successful S series. The T series models have similar specifications to the S series, but they talk directly with a standard PC running a data analysis software package, via a high speed RS232 in both ASCII and super high speed binary modes.

	Common Features The S and T series use rapid change Z beam loadcells that allow for simple and quick 'sizing' of the machine to an appropriate capacity for the test. These loadcells have an accuracy of 0.5% of the applied load value, from 2% to 100% of the loadcell capacity. The S and T series have a huge assortment of specimen grips and fixtures available, allowing the selection of an ideal grip for your application.

Key Features
PC control via high speed RS232 using ASCII mode and super high speed binary mode
Force accuracy of +/-0.5% of applied load across the loadcell display range
Machines are proof loaded to 200% of capacity
Displacement resolution of 0.0001mm (T series in binary mode)
Speed resolution of 0.001 mm/min
Built-in intelligent active force and displacement alarm system
32 bit precision motor controller
150% mechanical overload capacity on each loadcell
20% digital load tare while maintaining full load cell capacity
Automatic motor drive alarms that monitor over/under voltage, current and temperature.



		Model H50KS (Figure 34)



	Model H10KT (Figure 35)



		Model H25KT (Figure 36)



		Model H50KT (Figure 37)


	Fig 33. Model H10KS using split bollard grips to test yarn (Shown at top of page) Fig 34. Model H50KS with model HT43 bollard grips testing seatbelt webbing Fig 35. Model H10KT being used with HT29 grips to test thin rope Fig 36. Model H25KT using model HT40 grips to test fabrics Fig 37. Model H50kT with HT21 grips


	Specifications: Load measurement accuracy: +/- 0.5% of applied load from 2% to 100% capacity Extended range down to 1% capacity with accuracy of +/- 1% of indicated load. Position measurement accuracy: 0.01% of reading or 0.001mm, whichever is greater Speed accuracy: 0.005% of set speed Operating temperature range: 32 to 100 degrees F (0 to 38 degrees C) Storage temperature range: 14 to 115 degrees F (-10 to 45 degrees C) Humidity range: 10% to 90% non-condensing, web bulb method Power: Standard optional voltages 220/240VAC, 50-60 Hz, 2000W Power must be free of spikes and surges exceeding 10% of the nominal voltage. Notes: 1. Load weighing system meets or exceeds the requirements of the following standards: ASTM E4, EN 10002-2, BS 1610, DIN 51221, ISO 7500-1. Tinius Olsen recommends that systems are verified at installation in accordance with ASTM E4 and ISO 75001. 2. Strain measurement system meets or exceeds the requirements of the following standards: ASTM E83, EN 10002-4, BS 3846 and ISO 9513. 3. These models conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1 4. Specifications are subject to change without notice

	Technical Specifications

Model		H10K	H25K	H50KT
Capacity	lbf	2,000	5,000	10,000
	kN	10	25	50
	kg	1,000	2,500	5,00
Clearance between columns	in	16	16	16
	mm	405	405	405
Load Cells		Rapid change, low profile Z type, load cells with digital encoding for automatic recognition and scaling available - 10kN, 5kN, 2.5kN, 1kN, 500N, 250N, 100N, 50N, 10N, 5N	Rapid change, low profile Z type, load cells with digital encoding for automatic recognition and scaling available - 10kN, 5kN, 2.5kN, 1kN, 500N, 250N, 100N, 50N, 10N, 5N	Rapid change, low profile Z type, load cells with digital encoding for automatic recognition and scaling available - 10kN, 5kN, 2.5kN, 1kN, 500N, 250N, 100N, 50N, 10N, 5N
Maximum Crosshead Travel		Measurement direct from ballscrew - fully auto scaling of single measurement range	Measurement direct from ballscrew - fully auto scaling of single measurement range	Measurement direct from ballscrew - fully auto scaling of single measurement range
	in	43	43	43
	mm	1100	1100	1100
Testing Speed Range	in/min	0.001 to 1000	0.001 to 1000	0.001 to 1000
	mm/min	1,000	2,000	5,000
Capacity at Maximum Speed	lbf	1,000	2,000	5,000
	kN	5	10	25
Maximum Speed at Capacity	in/min	20	20	10
	mm/min	500	500	250
	in/min	0.00004 to 40	0.00004 to 40	0.00004 to 20
	mm/min	0.001 to 1000	0.001 to 1000	0.001 to 500
Return Speed	in/min	0.00004 to 40	0.00004 to 40	0.00004 to 20
	mm/min	0.001 to 1000	0.001 to 1000	0.001 to 500
Dimensions HxWxD	in	63x26x18	63x26x18	64x29x20
	mm	1600x650x450	1600x650x450	1613x720x500
Weight	lb	255	265	310
	kg	115	120	140

STANDARDS

See Separate Standards Page


	ORDERING INFORMATION

H10KT Dual Column Universal Tester, Computer Driven, 10KN/2000LBF capacity
H10KS Dual Column Universal Tester, With console, 10KN/2000LBF capacity
H25KT Dual Column Universal Tester, Computer Driven, 25KN/5000LBF capacity
H25KS Dual Column Universal Tester, With console, 25KN/5000LBF capacity
H50KT Dual Column Universal Tester, Computer Driven, 50KN/10000LBF capacity
H50KS Dual Column Universal Tester, With console, 50KN/10000LBF capacity
HT5020 TexMAT Pro Software
HT1010-1034 Load Cells, 5N, 10N, 25N, 50N, 100N, 250N, 500N, 1KN, 2KN, 5KN
HT1010-4160 Grips and Accessories, see separate list
   G265 Silent Laboratory Compressor (Optional) for use with pneumatic grips only
   G278A IBM Compatible Computer
   G278B Ink Jet Printer

Return to Index Page

Continue to next page

Go back to previous page


	[Home] [About Us] [Catalog] [2007 News] [Contact Us]


	Please contact our Webmaster with questions or comments. ©Copyright 2007 SDL Atlas, Inc. All rights reserved.