SAFETY TESTING EQUIPMENT FOR SNAPS, BUTTONS/OTHER GARMENT ATTACHMENTS

G201AA

   SAFETY TESTING EQUIPMENT FOR SNAPS, BUTTONS AND OTHER GARMENT ATTACHMENTS
G201AA1-3 Snap Tester

G201AA1-58 Snap Tester

To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments. Consists of an Upper Snap Clamp, a Lower Fabric Clamp & a Force Gauge mounted on a Stand. The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the Lower Fabric Clamp. By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded. Capability can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garment Accessories such as Zippers, Bows, AppliquΓ©, Toggles, Hooks/Bars and D-rings amongst others.
The detachment of a snap or other part may be classed as small parts; whilst broken small parts may require sharp point & sharp edge testing. As a result, additional testing equipment may be recommended such as :
Small Parts Cylinder (G201A9-10)
Sharp Point Tester (G201A1-3)
Sharp Edge Tester (G201A4-6)
Button Impact Tester (M289)
 

Link here to the Testing Textiles web site - articles about testing methods and techniques

PACKAGE

STANDARD

  /GAP/ 

H&M

 

NIKE

 

WEIGHT

23 kg

50 lb

 

 

27 kg

60 lb

 

 

 

 

 

 

 

DIMENSIONS

Width

Depth

Height

Width

Depth 

Height

 

225 mm

280 mm

735 mm

225 mm

280 mm

735 mm

 

9 inch

11 inch

29 inch

9 inch

11 inch

29 inch

 

9 inch

9 inch

9 inch

9 inch

9 inch

9 inch

STANDARDS

ASTM F963: 96A

 EN 71 Part 1:1998

16 CFR 1500.51-53 (CPSC USA)

ASTM WK4510 PS 79

M&S P115A

ORDER CODE

ITEM DESCRIPTION


STANDARD PACKAGE*

RETAILER PACKAGES

APPLICATION

GAP

H&M*

NIKE*

Package

β˜†: Included  X: Not included  

 

G201AA

SNAP TESTER W/FB-30K

β˜†

 

 

 

Standard Package

G201AA1

SNAP TESTER W/FB-30K FOR GAP
G201AA1-3

X

β˜†

X

X

Baby Snaps only

G201AA2

SNAP TESTER W/FB-30K FOR H&M (IMAGE ABOVE)

X

X

β˜†

X

Snaps/ Buttons/ Garment Accessories

G201AA3

SNAP TESTER W/ FB-100LB FOR NIKE (IMAGE ABOVE)

X

X

X

β˜†

Snaps/ Buttons/ Garment Accessories

Fixtures & Accessories

 

G201AA40

 

FORCE GAUGE FB-30K

 

β˜†

 

β˜†

β˜†

X

Displays force up to 30 kg capacity

G201AA41

 

FORCE GAUGE FB-100LB

 

X

 

X

X

β˜†

Displays force up to 100 lb capacity

G201AA42

BENCH TOP STAND W/PLATE FOR GAP

β˜†

β˜†

X

β˜†

Accurate force application

G201AA43

BENCH TOP STAND W/PLATE FOR H&M

X

X

β˜†

X

Accurate force application

G201AA44

 

 

LOWER FABRIC CLAMP

β˜†

 

 

β˜†

β˜†

β˜†

To grip Fabric Sample with constant force to avoid slippage

G201AA45

 

CALIBRATION WEIGHT, 15 LBS

 

β˜†

 

β˜†

β˜†

β˜†

To verify the accuracy of Force Gauges

G201AA46

 

UPPER SNAP CLAMP

β˜†

 

β˜†

β˜†

β˜†

For female snap parts

G201AA47

 

UPPER STUD CLAMP

β˜†

 

β˜†

β˜†

β˜†

For male snap parts

G201AA48                                                                                           

LOWER GRASP BUTTON KIT

β˜†

 

 

X

β˜†

β˜†

Accessory for Lower Fabric Clamp for Jean buttons & larger buttons up to 30 Ligne

G201AA49

 

UPPER GRASP BUTTON CLAMP

β˜†

 

X

X

β˜†

For Jean Buttons & Four Hole Buttons

G201AA50

 

UPPER SNAP CLAMP (CAPACITY 100 LB)

X

X

X

β˜†

For larger female snaps up to 100 Lb capacity

G201AA51

 

UPPER STUD CLAMP (CAPACITY 100LB)

X

X

X

β˜†

For larger male snaps up to 100 Lb capacity

G201AA52

EXTENDED PEG HOOK FOR SNAP TESTER

X

X

X

β˜†

Hook for Zipper Pulls

G201AA53

 

ZIPPER PULL TAB TEST FIXTURE (IMAGE ABOVE)

 

X

X

X

β˜†

To hold Zipper Pulls

G201AA54

 

SEAM CLAMP 4" WITH SCREW CONNECTOR

 

X

X

X

β˜†

To grip Side Tabs/ Bows/ Tassels

G201AA55

 

TWO PRONGED CLAMP WITH SCREW CONNECTOR

X

X

X

β˜†

Two prongs for D-rings, Zipper Stops, Hooks/ Bars

G201AA56

 

LOCKER PLIER WITH SCREW CONNECTOR

X

X

X

β˜†

For small metallic decorations such as AppliquΓ©

G201AA57

 

VISE FOR SNAP TESTER

X

X

X

β˜†

Lower ViseGrip for different sample sizes

G201AA58

 

SPECIAL BACK PLATE FOR NIKE FB-100LB

 

X

X

X

β˜†

To extend the maximum traveling height of Force Gauge

G201AA59

GOGGLES

X

X

β˜†

β˜†

Eye protection

*Remarks:

The Standard Package also complies with the test requirements of other retailers such as Levi's, AMC, Target, Federated, C&A, and M&S amongst many.

H&M Package (G201AA2) also includes Small Part Cylinder (G201A9) & Long Nose Vise Grip (G201A23).

Nike Package (G201AA3) is for testing of snaps/ buttons and garment accessories only. To comply with Nike's Safety Requirements, additional equipment should be ordered as follows :

ORDER CODE

ITEM DESCRIPTION

G201A9

Small Parts Cylinder

G201A34

Small Balls Fixture

G201A1

Sharp Point Tester with Weight

G201A11

Torque Gauge Model 9 BTG

G201A12

Torque Clamp (Central Screw Type)

G201A15

Table Vise

  

Return to Index Page

 Continue to next page
Go back to previous page
[Home] [About Us] [Catalog] [2007 News] [Contact Us]

Please contact our Webmaster with questions or comments.
©Copyright 2007 SDL Atlas, Inc. All rights reserved.